Evalit
Evalit ET066 Replacement Filters
Washable pre-filter, HEPA layer and activated carbon, with an additional adsorbent layer in the Pet Dander configuration.
View product details →Replacement Filters
Evalit Replacement Filters for the ET066
Evalit replacement filters help ET066 owners keep routine maintenance simple with configurations designed for this purifier family. Our options include Original three-stage filters and Pet Dander four-stage filters, each available in one-pack and two-pack choices. When selecting a replacement filter, confirm the ET066 model, choose the filtration configuration that matches your household routine, and decide whether one or two filters suit your maintenance plan. Every option includes a washable pre-filter, HEPA layer and activated carbon, while the Pet Dander version adds an adsorbent layer. Compare the available Evalit replacement filters below before continuing to your preferred configuration.
Frequently asked questions
Evalit Replacement Filter FAQs
How to clean an air purifier filter?
Clean the Evalit ET066 washable pre-filter by removing it from the purifier, rinsing or vacuuming it, and allowing it to dry fully before reinstallation. The replaceable main filter contains the HEPA and activated-carbon layers, so treat it as a replacement component rather than washing it with the pre-filter.
How often to change an air purifier filter?
Change the Evalit ET066 main filter when the filter indicator and your inspection show that replacement is needed. Filter life varies with operating time and room conditions, so a fixed interval is not appropriate for every home. Clean the washable pre-filter regularly to support routine maintenance.
Can I vacuum my air purifier filter?
You can vacuum the washable pre-filter used with the Evalit ET066 as part of routine care. Remove it first, clean it gently and reinstall it only when it is ready for use. The main HEPA and activated-carbon filter is a replacement component and should not be treated like the washable pre-filter.
How to reset an air purifier filter light?
Reset the Evalit ET066 filter indicator after installing the replacement filter by restarting the purifier and holding the filter button for three seconds until the indicator turns off. Complete the replacement first so the reset corresponds to a newly installed filter, and follow the product instructions during maintenance.
How to change an air purifier filter?
Change the Evalit ET066 filter by turning off the purifier, opening the front cover, removing the old filter, unpacking the replacement and inserting it in the correct position. Close the cover, restart the purifier and reset the filter indicator. Confirm that the replacement is intended for the ET066 before installation.